Product Description

Zhejiang Huajian company lamps inspection methods and standards

Zhejiang Huajian Commodity Inspection co., LTD. is a professional supplier providing audit, inspection services, container loading services of the third party inspection company. We spare no efforts to uphold justice, professional, scientific, rigorous, efficient quality service concept to provide professional products for global market performance evaluation, quality assurance, and factory ISO accreditation service! With excellent and high-quality senior engineers inspection and review team, covering the operation network in mainland China, thoughtful and meticulous consultant services, to provide you with a detailed evaluation report within 24 hours! Enable you to timely make the best choice of product supply, to your business operation with the best quality assurance! Lamps AND lanterns are indispensable necessities in every household life, so the inspection of lamps and lanterns and detection appear particularly important. Then how to inspect the lamps and lanterns? This article will give you a detailed introduction to the lamp inspection method and step guide.
I. Inspection requirements for all kinds of lamps and lanterns
(I) Requirements and basic requirements for inner and outer boxes:
1, five layers of double B corrugated, face A inside B standard outlet box.
2. Color box (1) laminating (2) glazing (3) ordinary, color and content shall be inspected according to the contract. Box type, white board, single E corrugated, double E corrugated, inspected according to the contract.
Lamps are divided into outdoor lights, floodlights, courtyard lights, indoor lights, buried lights, underwater lights, sky lights and so on. Lamp materials are aluminum die casting, copper die casting, copper Hongchong. aluminum profile, stainless steel pull up iron sheet pull up. Zinc die casting, PC, ABC plastic products, etc. So according to different lamps and applications. Reasonable inspection according to the requirements, the premise of inspection is to confirm with the factory when our company contracts with the factory. Various production requirements and product quality to produce qualified products. Our purchasing department and sales staff should be familiar with the products and their requirements. To purchase cost-effective products. Ensure the integrity of the overall product, performance safety, good consistency.
(2) Aluminum die-casting lamp:
The market is now inconsistent with the price. So the same product with, requirements are different. But the basic requirements must be met. These are usability, security, and appearance.
The following are the basic inspection requirements for aluminum die-casting lamps:
1. The size, weight, smooth surface, no scratch and color are in accordance with the contract. The surface treatment has no peeling phenomenon. Scratch tests are strictly required.
2, the various parts of the lamp, up and down, anastomoses, should be good. The appearance should be free of flares, rough edges, large depressions and molds. Can meet the contract requirements IP level.
3. The screws used are all national standards. In general, the exposed stainless steel. For example, the lock aluminum cover of the high chandelier is a large piece of screw, and there are many kinds of screws, which should be reasonably matched according to various lamps and lanterns. Large tooth pads are necessary for stationary ballasts. Need to Pierce the paint layer. Make the grounding path good.
4, the outdoor light with punching parts, namely, electrical board, bracket, according to the requirements of various lamps, such as ordinary 400W lamp, bracket thickness 3mm, 40mm width, electrical board for 1mm, white zinc plating or galvanized plate.
5. Electric lamps and lanterns are generally wired with silica gel. The wire diameter is consistent, L is brown and red, N is blue and yellow and green (and grounding symbol), the wiring end must be tightened, the line is correct. Grounding screw ribbon pad (strictly required for power test and high voltage test) has obvious indication at the inlet line.
6, with electric light, internal and external temperature and IP test. Temperature is internal and external conventional value, and toughened glass can be tested. IP test.
7, reflector, there are ordinary. Imported plate, oxidized plate and thickness. The goods should be viewed in accordance with the contract.
8, sealing ring, temperature resistant rubber, temperature resistant silica gel, foaming silica gel, wire plug, etc. Inspect goods according to contract requirement.
3. Plastic lamps and lanterns
Plastic materials are relatively wide, but used in lamps and lanterns, ABC, PC, acrylic more. In the application, the new material is the first class, most of which are the first class return material. In the inspection, the goods shall be inspected strictly according to the contract.
1, lampshade: smooth surface, no scratches, flowers, small feed hole is better. Good product feed hole is not obvious, the higher the transparency, the better, tan times, hair orchid is less, generally oblique to show a little blue. Such as new material, color pure, transparent, if there is a pattern, should be clear stripes, no breakage and too large phenomenon. The dimensions are exactly the same as the bottom shell, horizontal and straight. The weight and so on meet the requirements. Such as PC, with the foot will not damage.
2. The lamp bottom, weight and size are in accordance with the contract. Can match the hood. The exterior color conforms to the contract. Bright, no scratch, other components reasonable, can not have too large plastic printing. There are no holes. No cracking and powder return at the screw installation.
3, electrical plate according to the contract requirements, thickness, hole position, plastic spray, etc. All requirements are reasonable, no ash, fingerprints. There is an obvious feed tape at the feed line. The inner and outer packaging is the same as other lamps and lanterns, and the electrical appliances are installed according to the contract requirements. The diameter and color of the electric wires are in accordance with the requirements of the lamps and lanterns. The emergency power supply must have reasonable wiring and can be used repeatedly. The battery should be securely installed, and the power supply should be disconnected when shipping.
Two, lamp inspection standards
(1) Inspection of appearance:
1. Inspection of electroplating:
A, electroplating color should be uniform (refer to the sample), no obvious color difference.
B. The plating surface shall not be scratched, sand, acid spitting, sand printing, pinhole, pitting, blistering, peeling, whitening, rust spots, black spots, obvious paint flow, welding scar and other phenomena.
C, the brightness should be close to the mirror requirements, no white mist phenomenon.
D, the surface should be smooth without rough feeling (feel).
E. The inner surface of the product shall not be obviously black, dirty and oxidized.
F. Wipe gently with white gloves without slight abrasion.
G. Electroplated wire teeth should be good, without deformation, and can be easily locked in and out.
H, adhesion test and hardness test must be passed.
2. Inspection of paint baking:
A. Refer to the sample, the lamp body shall not have obvious color difference and gloss difference, and the overall color shall be consistent without obvious difference.
B, no paint leakage, paint stripping, sand, peeling, scratching, blistering, abrasion phenomenon.
C, spray paint should be uniform, smooth, no scarring, paint flow phenomenon.
D. Spray paint boundaries shall not overflow and cause other adverse situations.
E, the inner surface shall not have rust.
F. It shall not be deformed or unwelded.
G, adhesion test and hardness test must be passed.
H. Handmade paint should have a sense of layers.
(2) Inspection of structure:
1, lamp body foot inch and data error ±1/2 inch. The parts shall meet the engineering parts table and shall not be missed.
2. The structure is fastened after assembly, and there shall be no loosening phenomenon. At the same level after visual inspection, no skew phenomenon.
3. Single chandelier stop point with activity section must be effective.
4. The sling chain and the stressed dental tube and all the stressed parts should be able to bear enough heavy force.
5. According to the above provisions, if the lamp weighs more than 5.5KG, the crystal ring should be used to pass the ground wire conduction test.
(3) Inspection of safety functions:
1, 100% high pressure and polarity test. The European rules require that a ground wire test be passed.
2. If the chandelier has a switch, if the switch is pulled, sound should be issued and no automatic return. And the positive terminal must pass through the switch, and test the switch function.
3. Lighting tests must be carried out.
4. The lamp head material should be right, and there should be no damage, scraping, defects and copper wire exposure.
5, the lamp head is, the color plate should have obvious signs, the shrapnel shall not be oxidized, the elasticity must be good, not loose, not bad contact with the bulb.
6, the wire shall not be broken, oxidation, printing fonts shall not be wiped off by hand.
7. The positive and negative terminals of the wire should be right, and there should be no stains.
8, wire specifications according to customer requirements and required wattage, length, wire according to customer requirements.
9, the general wire should match the color with the lamp body, the ground wire also matches the lamp body (if the guests have special requirements must be according to the requirements of the guests).
(4) Inspection of glass:
1. Specifications and materials shall not be wrong.
2, glass color, processing color, glass thickness, surface treatment can not be wrong.
3, shall not crack, crack, crush, break edge, cut hand phenomenon.
4, shall not lack of Angle, watermark, mold marks, pitting, black spots, decal stick distorted, leakage, trachoma, scratch, bubble, bite acid uneven, clear bubble glass bubble size uneven, processing sandblasting uneven phenomenon.
5. The inner box should be protected with good glass.
6, the specific details according to the glass inspection operation instructions.
(5) Inspection of labels:
1, with cotton cloth dipped in water wipe 15 seconds, the word is not blurred.
2, label size should be correct, font size, model without error.
3, do not misuse, miss the use of labels, do not paste the wrong position.
4. The stickiness of the label is better, and there shall be no rolling up or falling off at will. No dirty phenomenon.
5. The label material is better, and the adhesive must be used to ensure fire prevention and waterproof.
(6) Inspection of parts package:
1. Whether the plastic bag is printed with warning, and through the air hole.
2, the package of parts is complete, not misloaded, missing parts.
3. The language and content of the instruction shall not be wrong. Paper is better, print better.
(7) Inspection of packaging:
1, the paper should be correct, the packaging must be guaranteed to pass the drop test.
2. The printing content of the outer package shall not be incorrect, including positive mark, side mark, order number, net weight, gross weight, machine type number, material, box number, machine drawing, place of origin, company name, address, fragile mark, direction mark and moisture-proof mark; The color of the printed font should be right, the handwriting and the pattern should be clear, and there should be no double shadow phenomenon. The whole batch should conform to the color plate color, the whole batch should not have obvious color difference.
3, the size of the length * width * height > error ±1/4 inch, the line should not be closed phenomenon, to ensure that the material is accurate.
4, the computer bar code to meet the requirements and clear through the scan to OK.

Payment Terms︰ PayPal

Product Image